Thursday, 14 December 2017 Heavy Tractor Trolley Driver Simulator Game

Heavy Tractor Trolley Driver Simulator Game
Cover art
Heavy Tractor Trolley Driver Simulator Game:
Start your tractor and it is time to deliver farm cargo to the market.
The village life is very beautiful as compared to urban city life. The fresh air and amazing environment makes you to play this trolley driver game. But there are also some devastating problems as well in village life. This drive offroad game that you will play is based on solving some of the problems. The only track that leads to the village is very dangerous off road track. Common driver cannot control heavy tractors on the off road dangerous track. The farmers have to supply raw foods, vegetables and fruits to the market. There is no expert driver that can drive in this tractor Game. This has become a big problem to supply goods to the market in this driving tractor game. The villagers have hired you as tractor driver cargo supplier. It’s your duty to take deliver cargo on your cargo tractor.

The gameplay of this cargo real transporting game is very simple. You will have a tractor and trailer in this transport game. The missions will be miscellaneous in this heavy tractor off-road traffic transport game. The crops and farm fresh products need to deliver to the market on time. It is very difficult task because the products are large in quantity in this off road tractor game. You have to take the responsibility in this cargo game. As a tractor driver, you need to maintain freshness of cargo and safety as well. You can also buy new tractor. You can buy more tractors in this cargo 3D game. So play more and deliver cargo in time to earn bonus money in this tractor heavy transport- real drive game. If you fail to deliver on time, your cargo will be rotten.

The player will enjoy the real music while playing this real tractor farmer cargo- driving games. However, the offroad track is very rough, dangerous and uneven in this tractor expert driver game. You will be tested with your tractor driving off road skills. You need to be very careful in this offroad cargo tractor game and do not flip over. The controls of this tractor simulation are also very simple and handy. You can use buttons to control direction of your tractor. Tap on the brake to stop and park tractor near market in this tractor delivery game. The driver can also adjust the camera view for his convenience in this metro tractor game. Drive tractor and explore the beauty of village life. Make sure you complete every mission of this offroad tractor game. Good lukc!

heavy tractor trolley driver simulator game Features:
Different tractors to drive
Precise driving simulator
Awesome and realistic 3D graphics
Hard but simple experience
Realistic in-game sounds
Unique off road dangerous track

If you have no wifi, you can play heavy tractor trolley driver simulator game absolutely free.
So quickly download this interesting drive tractor offroad cargo- farming games of 2017 offered by Door to Apps from Google Play Store on your android smart phones.
 Heavy Tractor Trolley Driver Simulator Game- screenshot thumbnail Computer POST and beep codes

Computer POST and beep codes

he computer POST (power-on self-test) checks a computer's internal hardware for compatibility and connection before starting the remainder of the boot process. If the computer passes the POST, the computer may give a single beep (some computers may beep twice) as it starts and continue to boot. However, if the computer fails the POST, the computer will either not beep or generate a beep code that tells the user the source of the problem.
If your computer has an irregular POST or a beep code not mentioned below, follow the POST troubleshooting steps to determine the failing hardware
1 shortDRAM refresh failure
2 shortParity circuit failure
3 shortBase 64 K RAM failure
4 shortSystem timer failure
5 shortProcess failure
6 shortKeyboard controller Gate A20 error
7 shortVirtual mode exception error
8 shortDisplay memory Read/Write test failure
9 shortROM BIOS checksum failure
10 shortCMOS shutdown Read/Write error
11 shortCache Memory error
1 long, 3 shortConventional/Extended memory failure
1 long, 8 shortDisplay/Retrace test failed
two-tone sirenLow CPU Fan speed, Voltage Level issue

AWARD BIOS beep codes

Below are Award BIOS Beep codes that can occur. However, because of the wide variety of different computer manufacturers with this BIOS, the beep codes may vary.
Beep CodeDescription
1 long, 2 shortIndicates a video error has occurred and the BIOS cannot initialize the video screen to display any additional information.
1 long, 3 shortVideo card not detected (reseat video card) or bad video card
Beeps repeating endlesslyRAM problem.
Repeated high frequency beeps while PC is runningOverheating processor (CPU)
Repeated beeps alternating high & low frequencyIssue with the processor (CPU), possibly damaged
If any other correctable hardware issues are found, the BIOS displays a message.

Dell beep codes

Beep CodeDescription
1 beepBIOS ROM corruption or failure
2 beepsMemory (RAM) not detected
3 beepsMotherboard failure
4 beepsMemory (RAM) failure
5 beepsCMOS Battery failure
6 beepsVideo card failure
7 beepsBad processor (CPU)
For other Dell beep codes, please refer to Dell's Beep Codes and PSA Diagnostics Chartpage.

IBM BIOS beep codes

Below are general IBM BIOS Beep codes that can occur. However, because of the wide variety of models shipping with this BIOS, the beep codes may vary.
Beep CodeDescription
No BeepsNo Power, Loose Card, or Short.
1 Short BeepNormal POST, computer is ok.
2 Short BeepPOST error, review screen for error code.
Continuous BeepNo Power, Loose Card, or Short.
Repeating Short BeepNo Power, Loose Card, or Short.
1 Long and 1 Short BeepMotherboard issue.
1 Long and 2 Short BeepsVideo (Mono/CGA Display Circuitry) issue.
1 Long and 3 Short Beeps.Video (EGA) Display Circuitry.
3 Long BeepsKeyboard or Keyboard card error.
1 Beep, Blank or Incorrect DisplayVideo Display Circuitry.

Macintosh startup tones

Error Tone. (two sets of different tones)Problem with logic board or SCSI bus.
Startup tone, drive spins, no videoProblem with video controller.
Powers on, no tone.Logic board problem.
High Tone, four higher tones.Problem with SIMM.

Phoenix BIOS beep codes

Below are the beep codes for Phoenix BIOS Q3.07 OR 4.X
Beep CodeDescription and what to check
1-1-1-1Unconfirmed beep code. Reseat RAM chips or replace RAM chips as possible solution
1-1-1-3Verify Real Mode.
1-1-2-1Get CPU Type.
1-1-2-3Initialize system hardware.
1-1-3-1Initialize chipset registers with initial POST values.
1-1-3-2Set in POST flag.
1-1-3-3Initialize CPU registers.
1-1-4-1Initialize cache to initial POST values.
1-1-4-3Initialize I/O.
1-2-1-1Initialize Power Management.
1-2-1-2Load alternate registers with initial POST values.
1-2-1-3Jump to UserPatch0.
1-2-2-1Initialize keyboard controller.
1-2-2-3BIOS ROM checksum.
1-2-3-18254 timer initialization.
1-2-3-38237 DMA controller initialization.
1-2-4-1Reset Programmable Interrupt Controller.
1-3-1-1Test DRAM refresh.
1-3-1-3Test 8742 Keyboard Controller.
1-3-2-1Set ES segment to register to 4 GB.
1-3-3-128 Autosize DRAM.
1-3-3-3Clear 512 K base RAM.
1-3-4-1Test 512 base address lines.
1-3-4-3Test 512 K base memory
1-4-1-3Test CPU bus-clock frequency.
1-4-2-4Reinitialize the chipset.
1-4-3-1Shadow system BIOS ROM.
1-4-3-2Reinitialize the cache.
1-4-3-3Autosize cache.
1-4-4-1Configure advanced chipset registers.
1-4-4-2Load alternate registers with CMOS values.
2-1-1-1Set Initial CPU speed.
2-1-1-3Initialize interrupt vectors.
2-1-2-1Initialize BIOS interrupts.
2-1-2-3Check ROM Copyright notice.
2-1-2-4Initialize manager for PCI Options ROMs.
2-1-3-1Check video configuration against CMOS.
2-1-3-2Initialize PCI bus and devices.
2-1-3-3Initialize all video adapters in system.
2-1-4-1Shadow video BIOS ROM.
2-1-4-3Display Copyright notice.
2-2-1-1Display CPU Type and speed.
2-2-1-3Test keyboard.
2-2-2-1Set key click if enabled.
2-2-2-356 Enable keyboard.
2-2-3-1Test for unexpected interrupts.
2-2-3-3Display prompt Press F2 to enter SETUP.
2-2-4-1Test RAM between 512 and 640 k.
2-3-1-1Test expanded memory.
2-3-1-3Test extended memory address lines.
2-3-2-1Jump to UserPatch1.
2-3-2-3Configure advanced cache registers.
2-3-3-1Enable external and CPU caches.
2-3-3-3Display external cache size.
2-3-4-1Display shadow message.
2-3-4-3Display non-disposable segments.
2-4-1-1Display error messages.
2-4-1-3Check for configuration errors.
2-4-2-1Test real-time clock.
2-4-2-3Check for keyboard errors
2-4-4-1Set up hardware interrupts vectors.
2-4-4-3Test coprocessor if present.
3-1-1-1Disable onboard I/O ports.
3-1-1-3Detect and install external RS232 ports.
3-1-2-1Detect and install external parallel ports.
3-1-2-3Re-initialize onboard I/O ports.
3-1-3-1Initialize BIOS Data Area.
3-1-3-3Initialize Extended BIOS Data Area.
3-1-4-1Initialize floppy controller.
3-2-1-1Initialize hard disk controller.
3-2-1-2Initialize local bus hard disk controller.
3-2-1-3Jump to UserPatch2.
3-2-2-1Disable A20 address line.
3-2-2-3Clear huge ES segment register.
3-2-3-1Search for option ROMs.
3-2-3-3Shadow option ROMs.
3-2-4-1Set up Power Management.
3-2-4-3Enable hardware interrupts.
3-3-1-1Set time of day.
3-3-1-3Check key lock.
3-3-3-1Erase F2 prompt.
3-3-3-3Scan for F2 key stroke.
3-3-4-1Enter SETUP.
3-3-4-3Clear in POST flag.
3-4-1-1Check for errors
3-4-1-3POST done, prepare to boot operating system.
3-4-2-1One beep.
3-4-2-3Check password (optional).
3-4-3-1Clear global descriptor table.
3-4-4-1Clear parity checkers.
3-4-4-3Clear screen (optional).
3-4-4-4Check virus and backup reminders.
4-1-1-1Try to boot with INT 19.
4-2-1-1Interrupt handler error.
4-2-1-3Unknown interrupt error.
4-2-2-1Pending interrupt error.
4-2-2-3Initialize option ROM error.
4-2-3-1Shutdown error.
4-2-3-3Extended Block Move.
4-2-4-1Shutdown 10 error.
4-3-1-3Initialize the chipset.
4-3-1-4Initialize refresh counter.
4-3-2-1Check for Forced Flash.
4-3-2-2Check HW status of ROM.
4-3-2-3BIOS ROM is OK.
4-3-2-4Do a complete RAM test.
4-3-3-1Do OEM initialization.
4-3-3-2Initialize interrupt controller.
4-3-3-3Read in bootstrap code.
4-3-3-4Initialize all vectors.
4-3-4-1Boot the Flash program.
4-3-4-2Initialize the boot device.
4-3-4-3Boot code was read OK.
two-tone sirenLow CPU Fan speed, Voltage Level issue

Thursday, 30 November 2017 Redmi Note 4

Redmi Note 4

Refreshing new look

The sky above us and the water that rejuvenate us. Lake blue is the colour of life. It is the perfect colour to reflect the times which we live in. Redmi Note 4 Lake blue edition brings spaces to life for those looking to illuminate their world with pure, extraordinary colour.

Power on slim with 4100mAh battery

Thanks to an overall design upgrade, the 4100mAh powerhouse has never looked better. 2.5D curved glass and slimmer, tapered edges deliver great hand feel. It also offers better sustained performance on a 14nm FinFET Snapdragon 625 processor and up to 4GB of RAM. We've also added power to pixels with a 13MP CMOS camera for amazing low-light results.
  • 4100mAh battery
  • Snapdragon 625
    14nm FinFET
  • Up to 4GB + 64GB
  • 13MP
    CMOS camera
  • Premium metal body
    2.5D curved glass

Snapdragon 625, 20% more power-efficient

Redmi Note 4 is supercharged by Snapdragon 625, an octa-core processor chip that uses the most advanced 14nm FinFET technology. It is 20% more power efficient than Redmi Note 3, and is bound to put more power in your pocket.

Game on with up to 4GB RAM

Expect a smoother gaming experience with up to 4GB RAM and 14nm FinFET technology.
It is this winning combination that delivers more thermal reduction and greater sustained performance.
Also comes with up to 64GB of storage.

13MP CMOS camera, stunning in low light

Redmi Note 4 uses a noise-eliminating CMOS sensor with backside illumination (BSI) and larger pixels to give you stunning images even in low light.
It also comes with Phase Detection Autofocus (PDAF) for 0.1s ultra-fast focusing, which is especially useful for shooting moving objects.